China Thread Glue 542 545 554 569 565 567 577 Sealant Thread Sealant For Hydraulic& Pneumatic Fittings
HiGlue anaerobic pipe thread sealant guarantee hydraulic and pneumatic tightness of the threaded connections.
BENEFITS:
◆ Replace hemp and Teflon PTFE tapes.
◆ Lubricate for easier assembly.
◆ Maintain the initial applied torque.
◆ Seal to the burst pressure and thermal expansion rates.
◆ Seal and lock threaded connections against pressure of gas, air, water, oils, hydrocarbons and many chemicals.
◆ Available in 3 grades of locking strength: low (easy to dismantle), medium (possible to dismantle), high (permanent locking).
HiGlue 545 is a pipe thread sealant designed for locking and sealing of metal pipes and fittings. It is specially formulated to offer high lubricity for easy assembly and removal. Recommended for fine threaded fittings as used in hydraulic and pneumatic installations and small fittings in general. Suitable for fittings up to 50 mm in diameter including pneumatic and hydraulic fittings.
HiGlue 542 is designed for the locking and sealing of metal pipes and fittings as well as other cylindrical metal assemblies. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. The thixotropic nature of it reduces the migration of liquid product after application to the part.
HiGlue 554 is a red, methacrylate ester acrylic thread sealant liquid which provides maximum solvent resistance on threaded fittings and pipes up to 2 in (50 mm) in diameter. The sealant is used in place of specialty non-hardening compounds, litharge, glycerin and sealing tape. It is suited to temperatures up to +300.2 °F (+149 °C). Provides maximum solvent resistance on threaded fittings and pipes up to 2 in (50 mm) in diameter. Recommended for refrigeration systems and service with strong chemicals Typical applications include metal and fiber plants, chemical processing, paper processing plants, waste treatment facilities and textile industries
HiGlue 577 is designed for the locking and sealing of metal pipes and fittings as well as other threaded assemblies. The product provides an instant, low-pressure seal for metal pipes and fittings. It will not creep, shrink or shred. It has excellent chemical and thermal resistance and offers less migration of liquid product after application. ◆ Medium-strength, general purpose thread sealant for sealing metal threads ◆ Suitable for all metals ◆ Instant low pressure seal ◆ Excellent chemical resistance ◆ Locks connection against vibration-induced loosening and other stresses ◆ Easy to apply ◆ Cures on active and inactive metals
HiGlue 565 is a white to off-white, 1-part, low strength, high viscosity, anaerobically-cured, methacrylate ester, acrylic thread sealant designed for the locking and sealing of metal pipes and fittings. The product cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration. ◆ Designed for the locking and sealing of metal pipes and fittings. ◆ Prevents loosening and leakage from shock and vibration
HiGlue 567 is an off-white, low strength, thixotropic methacrylate thread sealant. It cures in the absence of air and by contact with metals when confined within threads up to M80/R3”. It is best suited for use on coarse metal threads and its breakaway torque rating is 1.7Nm. Viscosity is 280,000 - 800,000 mPa·s and service temperature -55 to +150ºC. ◆ Provides an instant low pressure seal ◆ Doesn’t creep, shrink or block systems ◆ Single component - clean and easy to apply ◆ Thixotropic and high viscosity
How To Use
