Pipe Sealing Thread Cord for Water and Gas Leak Fix 150m 160m PTFE Tape immediate full pressure sealing String
2024-11-30 16:07:41
admin
2
What is pipe thread seal cord
The latest solution for plumbing and heating installation work.
Joint can be adjusted - without any fear of leakage.
Handy and light to transport.
Clean and easy to use.
Fast and cost effective.
Seals water, gas and compressed air systems immediately.
Temperature resistant up to 150℃
Pressure resistant up to 16 bar
Can be used on metal and plastic joints.
Approved EN 751-2 ,CE for GAS and has WRAS,BS6920 approval.
Certified to ANSI/ NSF Standard 61.
Joint can be adjusted - without any fear of leakage.
Handy and light to transport.
Clean and easy to use.
Fast and cost effective.
Seals water, gas and compressed air systems immediately.
Temperature resistant up to 150℃
Pressure resistant up to 16 bar
Can be used on metal and plastic joints.
Approved EN 751-2 ,CE for GAS and has WRAS,BS6920 approval.
Certified to ANSI/ NSF Standard 61.
Technical information
Our Advantages
Pipe thread sealing Cord VS
To seal 1/2" pipe fittings:
HIGLUE pipe sealing cord only need 6-8 turns
B.Better sealing performance
There is much sealing paste on HIGLUE pipe seal cord to help the sealing performance better
C.Reliable
It can be adjust to 45° and never leak
D.High pressure resistant
Max pressure resistance:60 MPa
E.Save money
1. 0.4m Pipe Sealing Cord to seal it (the cost is about 0.01usd), operation time is 24 seconds.
2. 10pcs*150m=1500m, CBM=0.002m³.7.56 times less sea shipping and warehouse cost.
PTFE tape
PTFE tape needs 15-20 turns
There is no sealing paste on PTFE Tape and easy to leak for some time later
It's easy to leak if adjust to 45°
Pressure resistance:5 MPa
1. 1.2m PTFE tape to seal it ( the cost is about 0.02usd), operation time about 50 seconds.
2. 100pcs*15m=1500m, CBM=0.01512m³.
2. 100pcs*15m=1500m, CBM=0.01512m³.
White sealing paste on the cord to help pipes seals better
There is no sealing paste on PTFE tape,it's easier to leak after some time
Directions for use
1. Clean parts with a wire brush prior to application of product.
2. Hold the end of the Pipe Sealing Cord against the male nipple with one finger approximately two threads away from the end.
3. Wind the fiber onto the pipe threads in the same direction of the thread helix starting from the end of the pipe. For optimum performance, the grooves of the threads should be filled without
completely masking the pitches of the thread. NOTE: It is not necessary to follow the valley of the thread.
completely masking the pitches of the thread. NOTE: It is not necessary to follow the valley of the thread.
4. CAUTION: Do notover-apply the Pipe Sealing Cord. Excessive material tends to be pushed off as fittings are assembled, and it also becomes mechanically more difficult to complete the engagement.
5. Cut the required length off with the integrated cutting tool and smooth the loose end onto the pitches of the pipe thread.
6. HIGLUE pipe seal cord can be adjusted up to 45° after tightening.
Application
1. Oxygen, petroleum gas; natural gas pipeline and valve installation;
2. public and household plumbing (cold water, hot water and heating.)
3. Industrial production ( pump, valve and pipe joint etc...).
Package
Company Profile
Jiangxi Gooz Adhesive Co., Ltd
Bldg, B3, Gongye Road, Lutang Village, Yining Town, Xiushui County, Jiujiang City,Jiangxi Province,China.www.hi-glue.com Email:LISA001@JXGOOZ.COM
BUSINESS HOURS
Monday-weekend:Spring& Summer: 9am to 6pm Autumn& Winter: 9am to 5:30pm