Pipe Sealing Thread Cord for Water and Gas Leak Fix 150m 160m PTFE Tape immediate full pressure sealing String

2024-11-30 16:07:41 admin 1
图片关键词
What is pipe thread seal cord

The latest solution for plumbing and heating installation work.

Joint can be adjusted - without any fear of leakage.

Handy and light to transport.

Clean and easy to use.

Fast and cost effective.

Seals water, gas and compressed air systems immediately.

Temperature resistant up to 150℃

Pressure resistant up to 16 bar

Can be used on metal and plastic joints.

Approved EN 751-2 ,CE for GAS and has WRAS,BS6920 approval.

Certified to ANSI/ NSF Standard 61.
 
Pipe Size
1/2"
3/4"
1"
11/2"
     2"
21/2"
    3"
31/2"
4"
Turns
6-8
7-9
8-12
10-15
15-25
20-30
25-25
30-40
35-45
图片关键词
图片关键词
Technical information
Agency approvals / certificates / specifications
DVGW, KTW, NSF
Color
White
Operating temperature
-55.0 - 150.0 °C (-65.0 - 300.0 °F )
图片关键词
Our Advantages
图片关键词

Pipe thread sealing Cord VS

 
To seal 1/2" pipe fittings:
 
A. Save half operation time
HIGLUE pipe sealing cord only need 6-8 turns
 
B.Better sealing performance
There is much sealing paste on HIGLUE pipe seal cord to help the sealing performance better
 
C.Reliable
It can be adjust to 45° and never leak
 
D.High pressure resistant
Max pressure resistance:60 MPa
 
E.Save money
1. 0.4m Pipe Sealing Cord to seal it (the cost is about 0.01usd), operation time is 24 seconds.
2. 10pcs*150m=1500m, CBM=0.002m³.7.56 times less sea shipping and warehouse cost.
 
图片关键词

PTFE tape

 
 
 
 
PTFE tape needs 15-20 turns
 
 
There is no sealing paste on PTFE Tape and easy to leak for some time later
 
 
It's easy to leak if adjust to 45°
 
 
Pressure resistance:5 MPa
 
 
 
1. 1.2m PTFE tape to seal it ( the cost is about 0.02usd), operation time about 50 seconds.
2. 100pcs*15m=1500m, CBM=0.01512m³.
图片关键词

White sealing paste on the cord to help pipes seals better

 
图片关键词

There is no sealing paste on PTFE tape,it's easier to leak after some time

 

Directions for use

1. Clean parts with a wire brush prior to application of product.
 
2. Hold the end of the Pipe Sealing Cord against the male nipple with one finger approximately two threads away from the end.
 
3. Wind the fiber onto the pipe threads in the same direction of the thread helix starting from the end of the pipe. For optimum performance, the grooves of the threads should be filled without
completely masking the pitches of the thread. NOTE: It is not necessary to follow the valley of the thread.
 
4. CAUTION: Do notover-apply the Pipe Sealing Cord. Excessive material tends to be pushed off as fittings are assembled, and it also becomes mechanically more difficult to complete the engagement.
 
5. Cut the required length off with the integrated cutting tool and smooth the loose end onto the pitches of the pipe thread.
 
6. HIGLUE pipe seal cord can be adjusted up to 45° after tightening.
图片关键词
Application
1. Oxygen, petroleum gas; natural gas pipeline and valve installation;
2. public and household plumbing (cold water, hot water and heating.)
3. Industrial production ( pump, valve and pipe joint etc...).
图片关键词
Package
图片关键词
图片关键词
图片关键词
Company Profile
图片关键词
图片关键词
图片关键词

 

Jiangxi Gooz Adhesive Co., Ltd

Jiangxi Gooz Adhesive Co., Ltd

Bldg, B3, Gongye Road, Lutang Village, Yining Town, Xiushui County, Jiujiang City,Jiangxi Province,China.
www.hi-glue.com Email:LISA001@JXGOOZ.COM

BUSINESS HOURS

Monday-weekend:
Spring& Summer: 9am to 6pm Autumn& Winter: 9am to 5:30pm

Contact Number:

+86-13437094759

Copyright 2009-2024 Jiangxi Gooz Adhesive Co., Ltd.

Bldg, B3, Gongye Road, Lutang Village, Yining Town, Xiushui County, Jiujiang City,Jiangxi Province,China.

+86-13437094759